Furnace Repair, Install & Replacement in Richmond, RI

Subject: (Option-2 96% Propane Furnace with Coil) Installation of New Goodman 96% Warm Air Furnace with New 3-Ton Coil in Basement in Existing Location with New Propane Line from Furnace to New Propane Tanks. Repairs of Existing Ductwork as Discussed with Customer. Relocate Washing Machine Connection in Basement.

DESCRIPTION:

- EXISTING EQUIPMENT REMOVAL
Evergreen Services will disconnect, remove, and dispose of the existing oil-fired furnace and associated components being replaced.
Disconnect and properly cap the existing oil supply line. Existing oil tank will be taken out of service, capped, and made safe. Removal of the existing oil tank is not included but an add-on price to remove oil tank can be found below “contract total”.

- NEW PROPANE FURNACE
Purchase and install one new Goodman 80k Btu Warm-Air Furnace Natural Gas Fired Multi-Speed Single Stage ECM 96% AFUE with 2.5-Ton Drive. Model: GR9S800804CN
Install necessary propane conversion components as required and set up the new furnace for proper propane operation.
Install new PVC combustion air intake and exhaust venting from the furnace to an approved exterior termination location in accordance with manufacturer requirements and applicable code.
Install new condensate drainage as required for the high-efficiency furnace.

- PROPANE GAS PIPING
Purchase and install new propane gas piping from the new furnace to the location of the propane tanks/regulator.
Propane line must be tested with 5psi of compressed air per local mechanical code.
Evergreen Services must obtain inspection on propane line once under pressure before tanks can be set in place.
Final propane tank and regulator location will be determined by the propane supplier and must meet all required clearances and applicable code requirements.
Propane tanks, regulators, initial propane supply, and work specifically required to be performed by the propane supplier are not included unless otherwise stated.